RT Pro RTP5101214 Heavy Duty Black Powder Coated 2 Lift Kit For Polaris RZR 800. RT Pro is proud to present the first lift kit that WILL NOT cause any CV issues for the remainder of the life of your RZR. We know this because we’ve tested the kit and can honestly say the rear will not droop any lower than the factory setup. We achieve this by relocating the UPPER shock mounts and not the lowers. This method improves the shock angles which require a lower spring rate to hold the vehicle at ride height. When retaining the stock springs however, the ride height is raised. This kit will allow you to back the “clickers” on your shocks down and still have the desired height needed for that additional ground clearance. So you get two things with this kit. A taller ride height PLUS an improved ride! Actual height gains will vary but expect approximately 1.5 rear lift and 2 front. Weve found our best performance with these machines by setting the fronts 0.5-1 taller. OEM springs are known to sag. If you end up with less lift than expected and still have stock springs this may be the problem. If you don’t get all the height you want, consider one of our replacement spring kits for your model. This kit is all bolt-on and the installation can be completed in less than 1.5 hours. There are four holes to be drilled in the rear of the frame for the ultimate in strength but this job is made simple by the very thorough instructions this kit comes with. This kit comes complete with all necessary components, hardware and instructions for complete installation. Kits are powdercoated black. This kit will fit all years RZR S 800, RZR 4 800 (Including Robby Gordon Edition). It will work with any OEM shock option. A very small percentage of 2012+ Canada and Mexico built RZR’s have some hole alignment issues with our rear lift brackets. This is a minor issue and VERY rare. However, we have addressed this in our instructions and have a alternative solution for the customers who may not have the means to install on these machines. Please note this is ONLY a potential issue for 2012+ RZR’s and is EXTREMELY RARE and MINOR. 100% MADE IN U. Pictures of the part may vary. Please refer to the listing title and product description for correct part! Great off-road driving and racing comes with having the most rugged and durable machine in the pack. RT Pro was built on this premise starting as Racer Tech back in 2006 with the original Yamaha Rhino. When the Polaris RZR was released the next year a whole new market was created and we were in position to be a natural leader. For the next decade we pioneered the UTV industry with many firsts including upper shock relocation lift kits, OEM replacement spring kits, HD tie rods, modular bumpers, roll cages and countless chassis gussets and more. RT Pro chassis, suspension and protection products will make your off-road machine stronger, faster and safer, so you can have more fun and less breakdowns. For the past decade, RT Pro staff have been taking brand new UTVs and driving them to their breaking point. When they bend, break or falter, we take them back to shop and create a fix that stops the problem from happening again. Our roots are in off-road racing, building custom desert race cars where breakdowns can be life threatening. Weve taken that same expertise and applied it to designing and manufacturing UTV products made to withstand abuse and look good doing it with minimal weight gains. We also know a thing or two about suspension design. We apply this to every lift kit and spring kit we produce and feel very confident you wil not find a better ride improvement out there. There is no other company in the industry that puts more thought, engineering and design innovation into their products than we do. Our team is made up of off-road racers, mechanical engineers and talented fabricators who live and breathe all things motorsports. Above all, we share a passion for innovation, quality construction and getting things right. All of our products are designed for assembly by weekend warriors with normal garage tools. Assembly directions are complete and thorough. We could go on, but take a look at what some of customers have to say about their RT Pro fixes right over there. And you can read more product reviews on our website from other satisfied RT Pro customers. Steel and other high quality American components. We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “RT Pro RTP5101214 Heavy Duty Black Powder Coated 2 Lift Kit For Polaris RZR 800″ is in sale since Friday, May 1, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Lighting & Lamps\Light Bars”. The seller is “rudys_performance_parts” and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada.
- Country/Region of Manufacture: United States
- Interchange Part Number: Heavy Duty Upgrade Made In USA Offroading
- California Prop 65 Warning: Warning: Cancer & Reproductive Harm
- Manufacturer Part Number: RTP5101214
- Brand: RT Pro
- Warranty: Limited Lifetime